A Successful Project Review Meeting

On February 5th, after 20 months into the project ReSoURCE, the consortium members had the project review meeting with the project coordinator Susana Xará. The main highlights of the achievements accomplished during the first 18 months of the project were presented. Thanks to the strong commitment and engagement from all consortium members since the proposal phase, we achieved a seamless project initiation from the beginning.

The ReSoURCE project content is divided into 11 work packages and all of them were kicked-off as planned in the proposal. During this period, Material management and Sampling (WP1) was already timely finalized, while the other 10 work packages are still ongoing. Also, 12 deliverables have been successfully submitted. At this stage of the project, a major part of the pre-financing amount has been allocated towards implementing activities throughout this year and a half.

During this stage of the project, two milestones were successfully achieved. The first milestone is the achievement of defining, sourcing, and distributing feedstocks samples. The second milestone was reporting the feedstocks characteristics. Further details can be found in the deliverables published under the Knowledge Vault section.

During the review meeting, the scientific and technical aspects regarding each work package were thoroughly presented:

  • WP1, led by RHIM: Achieved comprehensive feedstock identification and standardization in sampling and sorting, coupled with in-depth industry analysis. The material characterization was carried out by RHIM and MUL. The feasibility of these potential sorting criteria was aligned with the requirements on the sensor systems in close cooperation with NEO, LSA, ILT and INN. To use a higher percentage of the breakout material, RHIM defined preliminary sorting requirements in close cooperation with CPI and SINTEF for alternative usage of the material. This will allow to enhance the efficiency and sustainability impact of automated refractory recycling during exploitation.
  • WP2, led by CPI in cooperation with MUL, RHIM, SINTEF: Successfully completed the base-line assessments and interim reports for both LCA and TEA.
  • WP3, led by MUL together with RHIM and CPI: Conducted a comprehensive waste characterization, complementary to WP1, which offered insights into the leaching behaviour and chemical-mineralogical composition, particularly when considered in conjunction with grain size.
  • WP4 led by MUL working in closely with RHIM, LSA, and SINTEF: Maximising fractions that are suitable for sensor-based sorting was validated with comparing conventional and alternate comminution technologies.
  • WP5, led by LSA in cooperation with ILT, NEO, INN, MUL: Work on all individual components has begun and initial successes include the completion of the Demo A & Demo B lasers (INN), a first test setup for the HSI (NEO) and a first optical spectrometer combination (LSA). NEO manufactured 2 cameras for initial on-site tests at LSA facilities and integration onto Demo A.
  • WP6, led by ILT in close collaboration with NEO, LSA, INN, MUL: Is running investigations for characterisation of the data structures from the individual sensors and classification of material with real sample material.
  • WP7, led by SINTEF together with LSA, RHIM, MUL: Successful initial experiments on direct sorting methods for 0-5 mm refractory leftovers as pretreatment before recycling.
  • WP8, led by LSA in collaboration with RHIM and SINTEF: The requirements for Demo B have been compiled illustrated in an initial prototype design. In addition, Demo A is currently under construction.
  • WP9, led by Crowdhelix: Combining different aspects, ranging from innovative and future-oriented activities, through technical tasks related to clustering with other projects, aiming to prepare the ground and promote new outcomes and developments of the project results. The activities of the work package have been fully implemented in a seamless and productive collaborative environment, providing a solid background for the further development phase, which will be further developed in the project. RHIM in collaboration with CPI, MUL and STEF, is dedicated to the integration of sorted refractory materials into developing alternative materials and products.
  • WP10, led by RHIM: Ensured that all good governance principles are respected while fulfilling the rules and obligation towards the funding agency. Furthermore, the rigorous project monitoring and regular evaluation of the project progress was conducted to ensure success so far.
  • WP11, led by SINTEF working closely together with RHIM, MUL, Crowdhelix: The activities of exploitation, dissemination, and communication is still ongoing. SINTEF and RHIM are responsible for managing and overseeing this strategy, nonetheless all partners are actively involved in showcasing project results and ensure proper participation in relevant events. Among the initiatives that have been successfully achieved during this phase are the website´s launch, the opening of social media accounts (LinkedIn & X), and the creation of 3 project videos posted on the project´s YouTube channel. Furthermore, blogs posts, press releases, and two scientific articles have been published so far. Also, the project has participated in 8 events.

The ReSoURCE project will foster future twin ecological and digital transitions and will affect every part of the refractory industry. The result of this project will be the implementation of new technologies, with investment and innovation to benefit all project partners and the refractory industry. Moreover, the work carried out so far supports the consortium’s ambition in creating significant impact for the refractory industry and the EU regarding CO2 emissions, recycling processes and energy savings.


Refractory recycling research project ReSoURCE

Authors Portraits

Alexander Leitner

Alexander studied Material Science at the Montanuniveristät Leoben, focusing on the field of micromechanics and material physics. He joined RHI Magnesita’s Strategic Project and Innovation Team in 2019 and recently joined the business unit Recycling in the field of Recycling Innovation and Technology.

Ramona Oros

Ramona started her career at the Carinthia University of Applied Sciences in 2012 as a researcher and project assistant. She is well familiar with various EU-funded project schemes, and now is the interim project coordinator for ReSoURCE.


Refractory recycling research project ReSoURCE

Alexander Leitner & Ramona Oros


Dr. Alexander Leitner is the technical leader of ReSoURCE.
Dr. Ramona Oros is the interim ReSoURCE project coordinator.